Rod Holder

Spare cap for rod holder rotatable
Spare cap for the swiveling rod holder with item number: 009898 This offer applies exclusively to the replacement cap made of rubber and not for the fishing rod holders. The fishing rod holder can be found in our shop.
4,90 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder stainless steel
The fishing rod holder is made of high quality and polished stainless steel (AISI 316). If you open the clip and put the rod in, the opening(width:16mm) will close automatically and the rod lie safe in the retainer.
9,90 EUR
 
incl. 16% tax excl. Shipping costs
Fishing rods retaining ring stainless steel A4 with plastic ring ARBO-INOX
With plastic ring in the middle to protect Very high quality fishing rod holder made of very robust stainless steel A4 to the fishing rod. Base length: 88 mm Baseplate width: 25 mm Height: 63 mm Outside diameter: 57 mm Inner diameter: 44 mm Drill hole diameter: 5 mm hole to hole: 68 mm
16,80 EUR
 
incl. 16% tax excl. Shipping costs
Rutenhalter für Deckeinbau Edelstahl
18,12 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder deck mounting stainless steel
The rod holder is made of high quality stainless steel and could be mount in a 30° angle. It contains a gimbal lock which prevent the rod from turning inside of the holder. The rod holder is in the inside made of rubber, this guarantees that the rod is not falling out of the holder. measurements: mainplate length.106mm width:85mm pipe-Ø:50mm mounting depth:240mm three drillings to stick the holder (Ø:7mm)
18,90 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder deck mounting stainless steel ARBO-INOX
The rod holder is made of high quality stainless steel and could be mount in a 30° angle. It contains a gimbal lock which prevent the rod from turning inside of the holder. The rod holder is in the inside made of rubber, this guarantees that the rod is not falling out of the holder. mainplate length:115mm width:87mm pipe-Ø:50mm mounting depth:240mm three drillings to stick the holder (Ø:7mm)
18,90 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder deck mounting stainless steel ARBO-INOX
The rod holder is made of high quality stainless steel and could be mount into the deck in a 90° angle. It contains a gimbal lock which prevent the rod from turning inside of the holder.It also contains a protection cap wich protects the pipe. The rod holder is in the inside made of rubber, this guarantees that the rod is not falling out of the holder. measurements: mainplate length.106mm width:85mm pipe-Ø:50mm mounting depth:240mm three drillings to stick the holder (Ø:7mm)
19,90 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder deck mounting stainless steel ARBO-INOX
The rod holder is made of high quality stainless steel and could be mount into the deck in a 15° angle. It contains a gimbal lock which prevent the rod from turning inside of the holder.It also contains a protection cap wich protects the pipe. The rod holder is in the inside made of rubber, this guarantees that the rod is not falling out of the holder.
24,89 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder deck mounting stainless steel A4 AISI 316 220mm High Quality!
The rod holder is made of high quality stainless steel(AISI 316) and could be mount into the deck. It possess a plate which could be stick anywhere on board through four screws, while the rod holder itself(the pipe) could be stick and remove all the time.The top of the rod holder is made out of rubber so that the rod is not turning around. measurements: length of pipe:220mm diameter of the pipe :50mm width of the plate: 91mm length of the plate:91mm
27,91 EUR
 
incl. 16% tax excl. Shipping costs
Angelrutenhalter schwenkbar   V4A-Edelstahl  Ø-65mm ARBO-INOX
This fishing rod holder is made out of stainless steel and is easy to stick to railing rods. The inclination ist free to choiceand this holder is naturally steady against water and ultraviolet radiation.It also contains a gimbal lock and is in the inside made of rubber so that the rod is not turning around. Suitable for railing rods from at least 22mm. This product is trough a set screw 360° turnable. measurements: length:245mm the inside diameter:40mm the outside diameter 65mm
29,90 EUR
 
incl. 16% tax excl. Shipping costs
Rod holder rail mounting stainless steel 360° ARBO-INOX
This fishing rod holder is made out of stainless steel and is easy to stick to railing rods. The inclination ist free to choiceand this holder is naturally steady against water and ultraviolet radiation. measurements: length:225mm the inside diameter :42mm suitable for railing rods from 22-25mm
29,90 EUR
 
incl. 16% tax excl. Shipping costs
Fishing rod holder stainless steel V4A 360° ARBO-INOX
Fishing rod holder made of stainless steel (V4A) for deck mounting.360° turnable with different angle options. It is naturally steady against water and ultraviolet radiation. In the inside it is made out of rubber so that the rod is not able to turn. measurements: base-length:91mm base-width61,5mm length:365mm pipe -Ø:51mm four drillings-Ø:6mm
48,90 EUR
 
incl. 16% tax excl. Shipping costs
Qualitäts Angelrutenhalter Edelstahl schwenkbar  ARBO-INOX
This fishing rod holder is made out of stainless steel.It is easy to stick to railing rods and through a set screw is the inclination free to choice.At the top the rod holder is also endoved with rubber so that the rod is not turnig around. This fishing rod holder is provided with a stick to detent the fishing rod. measurements: length:250mm diameter of the pipe:50mm Suitable for railing rods from 22 to 25mm
53,50 EUR
 
incl. 16% tax excl. Shipping costs
Angelrutenhalter flexible Montage Edelstahl V4A 360° ARBO-INOX
This fishing rod holder is made out of stainless steel (V4A) and it is naturally steady against water and ultraviolet radiation. The holder is provided with a clamp so it is easy to stick to nearly everything, it is 360° pivoted ,too. The black rubber in the inside protects the fishing rod also from turning around. measurements: entire-length:395mm pipe-Ø:50mm maximum-installationlength:102mm minimum-installationlength:33mm strength of the clamp:8mm
69,90 EUR
 
incl. 16% tax excl. Shipping costs
Show 1 to 18 (from a total of 18 products)